Private beta · Healthcare
AI agents that prove cold-chain compliance 24/7, track IAQ + comfort SLAs, and run entirely on the edge. Without ripping out your BMS.
Join the waitlist →24/7
cold-chain compliance evidence
auto-logged per fridge, per ward
IAQ + comfort
SLA tracking out of the box
with audit-ready receipts
on-edge
data sovereignty
HIPAA-compatible deployment, no cloud round-trip
Three modes — autonomous leads here
Primary for this page
Reads every chiller, AHU, and pharmacy refrigerator. Every setpoint change is logged with reason, time, and the agent that issued it.
Ops asks: 'which fridge is out of range right now?' Copilot answers + opens the work order.
Connect your sanctioned LLM via MCP. We're the secure bridge.
Hospital and pharmacy HVAC
HVAC AI Agents for healthcare continuously read your BMS telemetry across hospital wards, OR suites, and pharmacy fridges so you catch temperature drift in minutes, generate audit-ready logs on demand, and meet ASHRAE 170 and USP 800 requirements — without touching patient data.
Healthcare HVAC carries compliance weight that commercial buildings don't. A fridge zone that drifts 2°F overnight, an OR that loses positive pressure between cases, or a pharmacy compounding room that misses its humidity window can each trigger a board inspection, a Joint Commission finding, or a medication loss event. The audit trail your inspector wants is usually scattered across manual logbooks, BMS exports, and email threads.
HVAC AI Agents normalize your Siemens Apogee, Honeywell EBI, or Johnson Controls Metasys telemetry into a continuous, read-only audit log. Every setpoint change, every zone reading, and every alarm is timestamped and retrievable as a formatted PDF. Pharmacy fridges alarm within minutes of drift. OR suite pressure deviations are flagged in under 60 seconds with the room ID and the responsible AHU.
Integration is non-invasive and read-only by default. The agent reads BMS points and brand-cloud APIs over the network — no new hardware in the panel, no changes to existing safety interlocks. HVAC zone data (temperatures, pressures, airflow rates) is not Protected Health Information; the agent never touches your EMR or any patient-identifiable data, keeping deployment straightforward in HIPAA-governed environments.
Where it pays off
Four patterns we see repeatedly across hospital systems, pharmacy chains, and clinic groups.
Hospital facilities director
800 fridge and freezer zones across 4 buildings, logged manually by pharmacy staff. Pulling an audit for an inspector means hours of cross-referencing paper logs and BMS exports.
→ Agent normalizes all 800 zones into a continuous log. Audit PDFs for any date range pull in seconds — zone ID, reading, threshold, and technician response included.
Audit pull: hours → seconds
Pharmacy chain operations lead
60 retail pharmacy fridges across the region on paper logs. Board-of-pharmacy audit arrives with 48 hours notice; compiling compliant records from 60 locations is a two-day scramble.
→ Real-time fridge monitoring against USP 800 thresholds. Board-of-pharmacy audit PDFs generated on demand per location, covering any retention window.
Audit-ready in one click
OR suite manager
Positive-to-negative pressure reversal between surgical cases goes unnoticed for several minutes. No automated alert, no room-level attribution — just a manual check at shift change.
→ Pressure deviation detected and alerted in under 60 seconds with room ID and the responsible AHU identified. Infection control is notified before the next case begins.
Pressure deviation alert <60s
Infection-control officer
A potential exposure event requires evidence that airflow met target during a specific 4-hour window three weeks ago. Current system has no queryable history at that granularity.
→ Agent retrieves AHU runtime, airflow rate, and pressure differential for the requested room and window as a formatted compliance report, ready for the investigation file.
FAQ
No. HVAC zone data — temperatures, pressures, airflow rates, setpoints — describes physical building systems, not patients. It is not Protected Health Information under HIPAA. The agent reads BMS telemetry only; it never connects to your EMR, ADT feed, or any patient-identifiable system. This means deployment in a HIPAA-governed environment is straightforward: your compliance and legal teams are typically satisfied once they confirm the data pipeline touches only mechanical systems.
Yes — this is one of the most common use cases for pharmacy chain clients. The agent monitors every fridge zone continuously against your configured USP 800 thresholds and retains a timestamped log of every reading and alarm. When an inspection arrives, you generate a formatted PDF covering the requested location and date range in one click. The report includes zone ID, temperature readings, alarm events, and technician response times. Retention period is configurable; most clients set it to 3–5 years. Visit /compliance-reports for format details.
The agent includes pre-built ASHRAE 170 compliance views that map your AHU points to the standard's required parameters: air change rates, outside-air percentages, pressure relationships, and relative humidity bands for each room classification (OR, isolation, procedure, sterile supply). Reports can be exported on demand or scheduled monthly. If a parameter drifts outside the ASHRAE 170 band, the agent flags it in real time so you address it before the next inspection window, not after. Talk to our compliance team to see a sample report.
Yes to all three. HVAC AI Agents read from Siemens Apogee and Desigo CC via BACnet/IP, from Honeywell EBI via its OPC-UA and BACnet interfaces, and from Johnson Controls Metasys via the N2 Bus or Metasys API where available. Integration is read-only by default; no BMS configuration change is required. If your site runs a different BMS, check /coverage for the full integration list or contact us — most BACnet-compliant systems connect in under a day.
The agent learns each zone's normal operating band over 7–14 days before it fires any alarm. Alerts are ranked by severity (fridge out-of-range versus setpoint nudge are weighted differently), and you configure suppression windows for known maintenance cycles. Alarm routing is point-to-point: fridge alerts go to pharmacy staff, OR pressure alerts go to OR charge nurse and facilities, not to a single email list. Most hospital clients reduce actionable alarm volume by 60–70% compared to raw BMS alarm floods within the first month.
Phase 1 is a 2-week pilot on one building: connect BMS telemetry, baseline all monitored zones, validate alarm quality with your facilities team. Phase 2 expands building by building; each additional building typically takes 3–5 days depending on BMS integration complexity. Phase 3 wires compliance reporting into your existing QA workflows. A 4-building hospital is usually fully on the platform in 6–10 weeks. We have healthcare-specific rollout playbooks — ask us for the one that matches your BMS footprint.
Per site (building or campus), with tiering by monitored zone count. There is no per-sensor or per-point metering. Pricing includes integration support, compliance report generation, and audit log retention. A single-building pilot is a fixed-fee engagement. Multi-site rollouts move to an annual contract. Healthcare contracts include a BAA if your compliance team requires one, even though HVAC telemetry is not PHI. Request a quote from the form below and we will scope your portfolio.
Yes. Compounding pharmacy cleanrooms (USP 797/800) require ISO Class 5/7/8 pressure cascades, temperature bands, and humidity control that HVAC AI Agents track natively. The agent monitors differential pressure across each cleanroom boundary and alerts on cascade violations in real time — a positive-pressure ISO 5 hood losing differential to its ISO 7 anteroom, for example. Compliance logs capture every reading required for USP 797/800 documentation. Contact our compliance team for a cleanroom-specific demo.
Still have a question?
Type a question. We'll route it to the right page or capture it for our compliance team.
Carrier, Trane, Daikin, Mitsubishi, LG, Lennox, York, Samsung — 20+ HVAC, home-automation, and BMS brands.
63 brands across 3 categories — HVAC (31), Home Automation (18), BMS (14). Protocols: BACnet, KNX, MQTT, Matter, Modbus, REST, WebSocket, Z-Wave, Zigbee.
How it stays out of your way
Sealed data plane. Per-site auth. Audit log on every setpoint touch.
Deploys at the building edge — your data doesn't leave the site to be useful.
Works with Claude, ChatGPT, and any MCP-compatible client. You pick the brain.
Private beta
Designed for hospital + clinic + pharmacy chain ops.
Required for the site to work. Bot protection (__cf_bm cookie set by Cloudflare) and
form rate-limiting (one-way HMAC of your IP, 1-hour expiry). Cannot be disabled.
Anonymized traffic stats via Cloudflare Web Analytics (cookieless). Helps us understand what pages people visit.
Save-and-resume for long forms (localStorage). If off, you'll need to complete forms in one sitting.